Mafi kyawun sayarwa eps yankan layi
Eps yankan layi
A. EPS Bƙulla layin ajiya
Za a iya adana tubalan 6 akan layi. Tubalan suna da matsayi ta hanyar amfani da cokali mai yatsa.
Lokacin da tlter kyauta yake, to toshe zai matsa zuwa sashin naúrar don fara yankan ta atomatik.
B. EPS Toshe naúrar
An kori Tiller ta Hydraulic. Lokacin da aka toshe shinge gaba ɗaya, naúrar ta sanya toshe a kwance a kwance sarkar isar da isar da kaya da kuma matsawa gaba.
C. A kwance a kwance jingina
Lokacin da aka toshe EPS zuwa kan takamaiman firikwensin, silinka zai rayu toshewa na EPS da 4 pups za su daidaita da bututun EPS a cikin yankan yankewa, don ci gaba da yanke daidai.
D. A kwance a kwance
Tsarin saitin waya na atomatik (Tsarin Patent) & Oscillation yanke a cikin wannan bangare. Wayoyi suna saita saurin da ake so. 60 Wayoyi na iya zaunar da minti 3, haƙuri mai haƙuri, ƙwaƙwalwa na 0.5mm. Magoya bayan hudu a bangarorin biyu don kwalliyar waya da fan daya a kasa.
E. a tsaye a tsaye
Wire Oscillation yanke a cikin wannan bangare. Fanaya daga cikin fan a saman & mai fan a ƙasa zuwa ƙasa don sanyi waya ƙare.
Saitin waya ta atomatik ba na tilas bane.
F. Babban Scrap REmoval & pre-Cruserer
Sanye take da kayan haɗawa, saman dutsen a lokacin da za'a iya cutar da bel ɗin sufuri kuma ya kai ga pre-Cruger. Bayan haka da pre-crushes kayan canjawa ta hanyar fan zuwa tsarin sake sake.
G. Cross yanke & toshe jeri
Za'a iya yanke toshe a cikin tsayin daka ta hanyar atomatik. Lokacin da aka toshe shi cikin wannan matakin gaba ɗaya, tsarin Jauntatawa zai daidaita hadaddun EPS zuwa matsayin yankan yankan da ya dace don ci gaba da yanke daidai. Waya yana motsawa daga ƙasa zuwa saman. Saitin waya ta atomatik, yanke oscillation yanke na tilas ne.
H. naúrar ta atomatik & gefen scrap recycling naúrar
Bayan yankan giciye, fakitoci suna zuwa kan motocin haya na ƙarshe da shirye su shiga cikin DE-Stacker. De-Stacker zai rayu ɓangaren ɓangaren EPS na farko, da ƙasa ɓangare EPS zai tafi don tattara injin farko. Bayan duk tubalan ƙasa suna cushe, ɓangare na sama na EPS suna faɗuwa zuwa ga mai isar da shi kuma tafi don shiryawa.
Scarp na gefe & kasan scrap pre-Crusher yana sanye da kayan aiki a cikin wannan matakin. Ana tattara scraps ta bel ɗin sufuri ga pre-Crugerer. Bayan haka da pre-crushes kayan canjawa ta hanyar fan zuwa tsarin sake sake.
EPS toshe injin
Injin na Eps naúrar amfani da fim pe don kunsa fakitin Eps daga bangarorin 4. Tsarin musamman don kiyaye abin kunshin. Saurin shirya kaya yana da sauri kuma babu buƙatar zafi fim ɗin ta tanda. Don ƙarin cikakkun bayanai don Allah nemo shi a cikin shafukan injin EPS.
Eps yankan ikon samar da injin
Model: SPQ (2000/3000/4000/5000/6000) b
• Ya dace da tsawon EPS: 2000-6000mm
• Ya dace da EPS Tubshe nisa: 1200mm
• Ya dace da kauri na Zuciyar EPS: 1200mm
• Yanke sauri: 1.8 ~ 2m / min @ dala 15kg / m3
Eps yankan fasalin layin
• Takaddun A
• fasalolin aminci da yawa
• Babban fitarwa tare da babban aiki
• Saitin waya ta atomatik a cikin a kwance a kwance, a tsaye da gicciye yanke na zaɓi
• Oscillation a yanka a kwance a tsaye yanke da giciye yanke na zaɓi
• Wurin WH ya ƙare sanyaya
• saman, gefe da kasan ƙasa yana samuwa
• Tsarin gargadi na Wire abu ne na waya
• Za a iya tsara injin dangane da buƙatun musamman na mai amfani
Haske na injin: mold jikin Rall5012 shudi + RAl1021 Rawaya
