Eps pre-shimfidar inji
Menene na'ura ta EPS Pre-shimfidar kaya?
Cikakken EPs pre-shimfidar inji, na'urar ta musamman don fadada EPS, ana sarrafa ta PLC da allo allon. Yana da cikakken atomatik tare da ingantaccen iko da lokacin sake zagayowar.
Dalilin fadadawar pre-forcion shine samar da kayan haushi ga yawan da ake so. A lokacin Evension, ana ciyar da kumfa a cikin jirgin ruwa wanda ke ɗauke da abin da ke ɗauke da kunci da kuma kayan iska, ana kiransa wannan injin pre-faɗaɗa. Tsarin EPS kumfa yana sarrafawa da zafin jiki da matsin lamba. Girman yawan barbashi yana ƙaruwa yayin da yawa na resin ragewa. Bayan ficewa daga na'ura ta EPS catcle Pre-faɗaɗa, da beads fadada zai gudana ta hanyar bushewa don cire danshi don cire silo.
A. Jiki na EPs Pre-Evader inji
• An yi fadada daga cikin ɗakin sus 304 Bakin Karfe, Siffar Cylinerrical a ciki & Siffar Sihiri a waje, tare da rufi.
• An yi agitator da sus 304 bakin karfe, saurin yana daidaitawa ta hanyar mai canza canji yayin juyawa daban-daban.
• Fitar da ƙofar located a gefen jirgin ruwa, don gaishe da ɗakin da sauri.
• shingen aminci zuwa sama & kusa da matakala.
B. Taɓaƙyacewa tsarin
Wani injin dinka mai dunƙule tare da tanki (kimanin. 1.5 M3 girma 1.5, 1200kg eps beads) yana amfani da nauyin EPS resing zuwa Dosing naúrar. Sannan kuma ciko wa ɗakin fadada ta hanyar nauyi.
C. Rana
A saman gado, akwai murfin tattarawa mai laushi, sassan bene da aka yi da sakin wuta na iska a ciki, wanda ke guje wa beads daga girgiza. A ƙarshen bushewa, akwai tsarin juyayi don aika beads na EPS zuwa ƙayyadaddun sils.
D. Rukunin Bayarwa na 2
Ana samun tsarin fadada na biyu don wannan EPS Pre-faɗaɗa don samun ƙananan yawa. PLC sarrafa fadada 2 a cikin tsayayyen girma. Cikawa daga silo zuwa injin ɗin yana yin injin fan.
Tsarin tururi PID
Steam na sarrafawa ta hanyar PID tsarin. Tabbatar da yanayin gabatarwar pre-expossion da haƙuri da ƙarancin haƙuri
F. Control Panel
Babban majalisar ministocin, tare da kulle tsaro, sanye take da allon Delta / Siemens taɓawa da PLC.
Duk sigogi da girke-girke za a iya ƙara, sake bita da ajiye shi a PLC.
G. Dearfin Weighting & Bugawa
Bayan kowane zagaye, tsarin nauyin lantarki zai tsotse kayan ƙara mai tushe daga na'urar bushewa da auna. Za'a iya ajiye bayanan da yawa a PLC ko buga a takarda.
EPS Batch Pre-Exthofication bayani
• Model:EPS Batch Pre-Fadada, Model: Spjy1600g
• Dambe diamita: 1600mm,
Haske mai tsayi: 2500mm,
• Haƙuri: ± 1.5%
• Fitar: 1600 ~ 1800kg / h, @ dernity 15kg / m3
• Model: Eps pre-shimfidar inji, Model: Spjy2000g
• Chember diamita: 2000mm,
• tsawo tsawo: 2000mm,
• Haƙuri: ± 1.5%
• Fitar: 2000 ~ 22000 ~ 22 200kg / h, @ dernity 15kg / m3
Eps Batch Pre-Fadada fasali
• Takaddun A
• Abubuwan da yawa na Tsaro mai yawa.
• Rage ƙarar matsin lamba daga Japan ana amfani dashi don sarrafa tururi
• Tsarin PID na tabbatar da daidaito ga EPS pre-forcion.
• sanye da "Metler Toledo" Weighting Sensor don ƙara daidaito mai nauyi
• Kayan kwallaye biyu suna gano kayan aiki don sarrafawa
• sanye take da sharar zafi da kuma sake amfani da tsarin
• Mitar mai saurin motsa jiki yayin fadadawa
• Ganyen ruwa mai sanyaya shi ne tare da mai hako rai don rage lokacin fadada bead tsufa
• Fadakarwa na biyu yana samuwa don ƙananan yawa
• Jiki: RA5012 Blue + Ral7035 Grey
• atomatik mai nauyi da tsarin firinta na tilas ne
• Atomatik EPS Silo tsarin yana samuwa don aiki tare da EPS pre-fander tare.
Eps Batch Pre-Fadada Main
• Taɓawa Allon & PlC: Siemens / Jamusanci
• Sanarwar zafin jiki: Siemens / Jamusanci
• Hannatu ta matsin lamba: Siemens / Jamusanci
• Wutar lantarki: Schneid / Faransa
• Tsarkakakken matakan shakatawa: Jiwei / china
• Motar agitator: dinka / Jamusanci
• Buttocky bawul: Flowx / Italiya
• Bawul na kusurwa: ESG / China
• Weight na Weight: Metler Toledo / Swerterland
• Rashin matsin lamba: Yoshitake / Japan
• sassan pneumatic: SMC / Japan
WHOMER PHOTOR: Autonics / Korea
