Block Molding vs Shape Molding: When to Use Which EPS Process
Block molding makes slabs you cut to size; shape molding fuses bead into a finished part. Compare output, tooling and use to pick the right EPS process.
Read More 
How to Size an EPS Silo System: Volume, Flow and Ageing Time
Size an EPS silo system by moulder bead demand per shift, not per hour. Learn why residence time for ageing matters more than raw storage volume.
Read More
Continuous vs Batch EPS Pre-Expander: Which Fits Your Line
Continuous and batch EPS pre-expanders expand bead differently. Compare flow, density control and footprint to pick the right pre-expander for your output.
Read More
EPS Cold Press Machine: Dewatering Scrap for Recycling
The EPS cold press machine explained: how it dewaters wet scrap foam before densifying, why it raises rebate, and where it fits your recycling step.
Read More EPS Foam Recycling Machine: Turn Scrap Foam into Profit
The EPS foam recycling machine explained: how scrap foam from cutting and molding becomes reusable bead or ingot, and which route fits your volume.
Read More EPS Recycling Machine: Densifier vs Compactor (Complete Guide)
The EPS recycling machine explained: densifier vs compactor routes, and where scrap recovery fits your cutting and molding line to cut material cost.
Read More
Geofoam: Lightweight Fill for Soft-Soil Construction
A short note on EPS geofoam as lightweight fill — where it cuts load on soft soil under roads, bridges and embankments.
Read More
EPS Wrapping Machine for Shape Products: Complete Guide
The EPS wrapping machine for shape products explained: 6-side PE film vs manual shrink, throughput and how to choose a wrapper for finished shape parts.
Read More
EPS Packing Machine: Types, Film & Selection Guide
The EPS packing machine explained: block packing vs shape wrapping, film choices and throughput, and how to pick the right packer for your line.
Read More EPS Shape Molding Machine: Dies, Parts & Selection Guide
The EPS shape molding machine explained: how it fuses bead into finished parts in a die, what die cost means, and when to choose it over block molding.
Read More